• Instagram
  • YouTube

  • Dani’s Blog
  • About
  • Things4You
  • Subscribe

esk8

esk8 / Drop Down ESK8 Brackets: Stainless vs. Aluminum

August 22, 2021August 21, 2021 / Dani

Finite Elements is great only if we can put it to use. The final goal is reached by Nice colors, which is cool, but only as means. So, how the…

Continue Reading
esk8 Structuresaluminum brackets fem

esk8 / Drop-Down esk8 Brackets Revisited

May 2, 2021May 2, 2021 / Dani

My previous version of these brackets was embarrassing. It looked good on paper (screen?), but just didn’t hold the loads. This post is all about improving the design.   What…

Continue Reading
esk8 Structuresanalysis brackets drop down redesign stresses

esk8 / First giveaway – dosimplecarbon

June 5, 2020June 4, 2020 / Dani

I’m celebrating some milestones in my personal life, so a proper party is in place. But, we’re in the COVID times, so a modest giveaway will have to suffice πŸ™‚…

Continue Reading
3dprinted coffee deck giveaway

esk8 / Old internals, New enclosure

May 29, 2020May 28, 2020 / Dani

Transplanting old internals into the new enclosure in few simple steps.   This enclosure version is available from Thingiverse – Thing: 4378914 You’ll have to print and assemble it, with…

Continue Reading
3dprinted enclosure internals

esk8 / 3d-printed enclosure dissected – good, bad, and the ugly

May 8, 2020May 7, 2020 / Dani

Printing with PLA a bad idea? It’s very weak and dissolves in water? Let’s revisit these ideas with personal experience   History I’ve made this enclosure almost a year back,…

Continue Reading
3dprinted cracks design enclosure

esk8 / Simple Angled Longboard Risers

April 24, 2020April 24, 2020 / Dani

Have a regular longboard deck but want to use channel trucks with it? Like here? Today’s post is for you.   A simple design that consists of 4 flat plates…

Continue Reading
analysis angled riser longboard riser stresses

esk8 / How to turn your mini into Chubby

February 6, 2020February 6, 2020 / Dani

Today we’re going to convert the mini remote into the Chubby remote. The most convenient thumb mod of the mini. Continue from last week. (I apologize for anyone who came…

Continue Reading
esk8 how to mini repackaging thumb remote

esk8 / Chubby Remote – the mini remote thumb mod you want for your esk8

January 30, 2020January 30, 2020 / Dani

I screwed up. It supposed to be a how-to post about converting your mini into the new Chubby remote. Instead this will be a post about all the cool features…

Continue Reading
esk8 mini mod remote

esk8 / Pyramid mount – what is it and why it works?

August 23, 2019April 24, 2021 / Dani

For the first time in my life I mounted a camera on my board. Instead of printing dedicated mount for it I ended up with something way cooler, and universal.…

Continue Reading
3dprinted camera esk8 mount

esk8 / Making Super Nice 3d Printed esk8 Enclosure

July 11, 2019July 25, 2019 / Dani

Planning to print your own enclosure for esk8? Worrying about joints and general 3d printing finishing? Here are some ideas for you.   Why it’s a good thing? Like in…

Continue Reading
3d printing diy enclosure esk8 finish

Posts navigation

1 2 … 4

Recent Comments

  • Dani on How to do a simple FEM Analysis – The case of Slide Inline Frames
  • arianetrek on How to do a simple FEM Analysis – The case of Slide Inline Frames
  • Dani on First giveaway – dosimplecarbon
  • Dani on First giveaway – dosimplecarbon
  • EDWIN MUN on First giveaway – dosimplecarbon
Powered by WordPress | Theme: Latest by uXL Themes
 

Loading Comments...